IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-liteNote:The STM32 MCU have change to ARM, fireware isARM CORTEX-MThe new stock will be ARM,Existing inventory is not affectedSpecification:Brand name:IRangeXOpera
Flash Sale Ongoing
IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite
Note:
The STM32 MCU have change to ARM, fireware isARM CORTEX-M
The new stock will be ARM,Existing inventory is not affected
Specification:
Brand name:IRangeX
Operating voltage:5-9V
Operating current: <=180mA
Operating frequency: 2.4G ISM band
RF power: +22dBm
MCU: ARM CORTEX-M(128K ROM, 20K RAM)
Weight: 32g
Overview:
This 4-in-1 TX moduleis suitablefor FRSKY X-Lite. It integratesfour RF chips (CC2500,NRF24L01+,A7105,CYRF6936) into one single circuit board,it supportsavariety of remote control protocols,such as Futabas S-FHSS, Walkera DEVO,SpektrumDSM2,DSMX, Flysky,Frsky,WLToys,Hubsan,Hisky,Esky , Assan etc.You can control your modelflexibility with it, and you will get muchexcellent experiencewith you favorite transmitter.
This moduleiscompatiblewith the Multi-module project on github.Its based on ARM microcontroller. Allavailableprotocols are includedin serial mode. In this mode, it usesa serial protocol to communicate withyour transmitter. Theserial protocol does not require any hardware modifications, butyou shouldupdatethe firmware on your transmitterto the latest. Then the model protocol selection and binding is done from the Model Settings menu on yourtransmitter. For telemetry capable transmitters, the telemetry integration is done seamlessly with the transmitterfirmware.
How to use:
1.Refer to the website above,update your transmitter with proper firmware.
2.Screw down the antennaof module tightly, and theninstall TX Module to the module bay of your transmitter.
3.Power on your transmitter, enter Model Settings menu, turn on External RF , and select MULTmode, then you will see the bind and protocol button in the menu, and then you can choose a properprotocolfor you model and bind with it now.
LED State:
Notice:
1.Make sure to check the multimoduleoption, when you update OpenTX firmware through Companion software.
2.In serial mode, for FRSKY and S-FHSS protocol, you may need set the value of Fine or Option (in Model Settings menuon your TX) properly to bind with your model. The value can be varied, since itspartly depended on your model.
Available protocols (incompleteand expanding)
Enable serial mode, Click here
IRX4 lite module manual, Click here
Package Included:
1 xIRX4 LITE TX Module
Reviews
There are no reviews yet.