Specifications:

Brand Name:RadioLink

Item Name: Byme-DB

Dimension: 29*25.1*9.1mm (1.14” x 0.99” x 0.36”)

Weight (With wires): 3.6g(0.13oz)

Channel Quantity: 7 channels

Integrated Sensor: three-axis gyroscope and three-axis acceleration sensor

Signal Supported: SBUS/PPM

Input Voltage: 5-6V

Operating Current: 252mA

Flight Modes: Stabilize Mode, Gyro Mode, and Manual Mode

Channel for Flight Mode Switch: the fifth channel

Channel for Throttle Cut: the seventh channel

Models Compatible: Applicable to all model airplanes with mixed elevator/aileron controls including delta wing, paper plane, J10, traditional SU27 and the SU27 with rudder servo, F22

Transmitters Compatible: All the transmitters with SBUS/PPM signal output

Socket Specifications: CH1, CH2 and CH4 are 3P SH1.00 sockets; the receiver connect socket is 3P PH1.25 socket; CH3 is a 3P 2.54mm Dupont Head.

Features:

ApplicableforMultipleModels:Applicabletoallmodelairplaneswithmixedelevatorandaileroncontrolsincludingdeltawing,paperplane,J10,traditionalSU27,andtheSU27withrudderservo,F22.

FlightControllerAssistEnhanceStability:Three-axis gyroscope and three-axis acceleration sensor combined with the full attitude algorithm, control algorithm, and digital filter make the airplane with the flight controller Byme-DB easy to change from Modes of Stabilize Mode/Gyro Mode/Manual Mode. Beginners can start with the Stabilize Mode and quickly master it even on the first flight.

ThreeFlightModes:StabilizeMode,GyroMode,andManualMode.Bothbeginnersandprofessionalpilotscanenjoythefunofflight.

PIDAutoTune:Byme-DB continues to optimize the optimal PID parameters based on Byme-D. The fourth channel output is used for a delta wing with rudders, etc. No need for parameter adjustment. Only the flight control mode switch and flight controller calibration need to be set when the first wiring.

English Manual, Click Here

Package Included:

1x Byme-DB Flight Controller

1x Byme-DB connection to Receiver

1x Double-sided Adhesive Tape

1x Packing Bag